Description
Edelbrock part #21813 Performer 351W intake manifold is designed for street 351 c.i.d. Ford Windsor V8’s. Will not fit Boss 351. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000. For more info call (865) 966-2269 or go to www.lokar.com. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.
Installation Instructions
Specifications:
| Basic Operating RPM Range | Idle-5500 |
| Center Maximum Height | 4.070 |
| CNC Ported | No |
| Description_ABR | Intake Mnfld |
| Description_ASM | Ford:Small-Block Windsor:351 (5.8L) |
| Description_DEF | Engine Intake Manifold |
| Description_DES | INTAKE MANIFOLD |
| Description_EXT | Edelbrock Performer Intake Manifold for 351 Ford Small Block Windsor engines |
| Description_FAB | For Idle to 5500 RPM Street-Driven Performance |
| Description_FAB | Stock Replacement |
| Description_INV | Black Performer 351W Ford Intake Manifld |
| Description_KEY | 21813; Ford; Edelbrock; Intake Manifold; Intake; Manifold; Dual-Plane; Performer; Black Powder Coated |
| Description_LAB | Performer 351-W Intake Manifold for S/B Ford 351 Windsor, Black Finish |
| Description_LAB | Performer 351-W Intake Manifold for S/B Ford 351 Windsor; Black Finish |
| Description_MKT | Edelbrock part #21813 Performer 351W intake manifold is designed for street 351 c.i.d. Ford Windsor V8’s. Will not fit Boss 351. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000. For more info call (865) 966-2269 or go to www.lokar.com. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look. |
| Description_SHO | { Sellable : Yes } |
| Description_SHP | { eo : 3in.} |
| Description_TRA | Carb pad height: 4.12″ |
| Description_TRA | Carb recommendations: Edelbrock AVS2 or Performer Series 600-650 cfm. For automatic transmissions use #1483 and #1491 or #1844. |
| Description_TRA | Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Description_TRA | Manifold height: A-3.50″, B-4.75″ |
| Description_TRA | Port exit dimensions: 1.09″ x 1.84″ |
| Description_TRA | Recommended intake gasket: Edelbrock #7220 |
| Description_TRA | Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA | • Recommended intake gasket: Edelbrock # 7220 • Manifold height: A-3.50in.; B-4.75in. • Carb pad height: 4.12in. • Carb recommendations: Edelbrock AVS2 or Performer Series 600-650 cfm. For automatic transmissions use # 1483 and # 1491 or # 1844. • Port exit dimensions: 1.09in. x 1.84in. • Use RTV sealant to properly seal end seals; such as Edelbrock High Temp Silicone sealant # 1076; DO NOT USE END SEALS GASKETS. • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| EGR Port | No |
| finish | Black Powder Coated |
| Flange Type | 4150 |
| Front Maximum Height | 3.400 |
| Gasket Or Seal Included | No |
| Grade Type | Performance |
| height | 6.75 |
| length | 23.75 |
| LTL | N |
| Material | Aluminum |
| Rear Maximum Height | 4.750 |
| RGL | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Series | Performer |
| Single Or Dual Plane Type | Dual |
| Vehicle Model | Ford |
| weight | 18.5 |
| width | 12.25 |
Explore more from our collection.
Reviews
There are no reviews yet.